Dansk
Deutsch
English
Nederlands
Svenska
Dry Bilge System - Fully Automatic and Self-priming, 12V, 1 L/min
Beskrivelse
The SEAFLO Dry Bilge System is the most economical and reliable way to keep your bilge clean and completely dry. Traditional bilge pumps and float switches always leave at least 2 inches of water in your bilge. This stagnant water can lead to mold, mildew, mustiness, odors, rot and can damage the integrity of your hull. The SEAFLO Dry Bilge System removes all standing water from the lower part of your bilge or other water-holding compartments.
The system is self-priming up to 25 feet, so it can be mounted away from the suction base. The system is activated by the easy-to-use programmable timer or manually by a rocker switch. Activate the system as much or as little as you want, depending on your vessel and conditions. This system also makes the bilge pump and float switch last much longer because they are used less.
Benefits and features:
Details
CAUTION: The SEAFLO Dry Bilge system is NOT a replacement for a conventional bilge pump. This system is a low-flow supplemental system designed to keep small amounts of water out. This system should never be used as a conventional bilge pump and should never be relied upon to maintain a vessel's buoyancy.
The system is self-priming up to 25 feet, so it can be mounted away from the suction base. The system is activated by the easy-to-use programmable timer or manually by a rocker switch. Activate the system as much or as little as you want, depending on your vessel and conditions. This system also makes the bilge pump and float switch last much longer because they are used less.
Benefits and features:
- Removes all standing water remaining after normal use of the bilge pump
- User programmable interface for manual or automatic operation
- Keeps your bilge clean and dry unlike other products or systems in the industry
- Helps prevent mold, mildew, mustiness, odors and rot caused by stagnant water left behind
Details
- Features built-in programmable timer for automatic operation
- High-impact durable plastic housing
- Quick connect fittings with 1/4″ flexible pipe
- Includes comprehensive user manual with installation instructions and wiring diagram
- Prevents mold, mildew and rot formation from residual water
CAUTION: The SEAFLO Dry Bilge system is NOT a replacement for a conventional bilge pump. This system is a low-flow supplemental system designed to keep small amounts of water out. This system should never be used as a conventional bilge pump and should never be relied upon to maintain a vessel's buoyancy.
Specifikationer
| SKU | 92051989 |
| Producentens produktnummer | SFDBS1-01 |
| Weight (kg) | 2.4 |
| Flow Rate (L/min) | 1 |
| Voltage | 12V |
| Max amperage (A) | 5.5 |
| Connection (type) | 5/16" & 1/2" Barb |
| Factory warranty | 2 jaar |
| Priming Capabilities (m) | 7.5 |
