Dansk
Deutsch
English
Nederlands
Svenska
Pressure tank accumulator tank, 1L, Pre-pressure: 0.7 bar adjustable up to 8.6Bar (10-125psi)
Beskrivning
1 liter pressure vessel for drinking water systems.
Pre-pressure: 0.7 bar.
Maximum adjustable pressure: 8.6Bar.
In most systems on board ships, the pre-pressure is set at 1.3 to 1.5 Bar.
There is a valve on the back of the pressure tank so that you can easily set the pressure vessel to the correct pressure.
The threaded connections are equipped with ½MNTP thread, hose tails for hose diameter 13mm internally are supplied as standard.
Length of the pressure vessel including valve: 300mm.
Width: 127mm.
Height: 114mm.
Center to Center distance of the screw holes: 105mm.
Placing a pressure tank in your water pressure system ensures a constant non-sputtering water flow and a smoother running water pump. and extends the life of your pump.
CAUTIONS
- Do not use to pump gasoline, petrol or fluids with flash point below 37°C(98°F), explosion or death may occur.
- Do not over pressurize tank. Pressures over 125PSI(8.6BAR) may rupture tank and cause personal injury.
Pre-pressure: 0.7 bar.
Maximum adjustable pressure: 8.6Bar.
In most systems on board ships, the pre-pressure is set at 1.3 to 1.5 Bar.
There is a valve on the back of the pressure tank so that you can easily set the pressure vessel to the correct pressure.
The threaded connections are equipped with ½MNTP thread, hose tails for hose diameter 13mm internally are supplied as standard.
Length of the pressure vessel including valve: 300mm.
Width: 127mm.
Height: 114mm.
Center to Center distance of the screw holes: 105mm.
Placing a pressure tank in your water pressure system ensures a constant non-sputtering water flow and a smoother running water pump. and extends the life of your pump.
CAUTIONS
- Do not use to pump gasoline, petrol or fluids with flash point below 37°C(98°F), explosion or death may occur.
- Do not over pressurize tank. Pressures over 125PSI(8.6BAR) may rupture tank and cause personal injury.
Specifikationer
| SKU | 92043847 |
| Artikelnummer fabricator | SFAT-100-125-01 |
| Mått (l x b x h) | 300 x 127 x 114 mm |
| Hose connection | 12.7 |
| Bar (pressure) | 0.7 - 8.6 |
| Factory warranty | 2 Years |
| Hose barb | 1/2" buitendraad |
| Weight (kg) | 0.52 |
Ytterligare produktinformation
Vi skickar din beställning med PostNL. Följande gäller: beställt måndag till fredag före klockan 17 skickas samma dag. Vi erbjuder olika fraktalternativ. Du kan välja ett av alternativen under kassan.
Visa fraktkostnaderna förr
Frakt till Nederländerna (NL)
| Frakt metod | Beställningsbelopp under €75,00 | Beställningsbelopp över €75,00 |
| Brevlådepaket+ med Track & Trace | €4,95 | Inga leveranskostnder! |
| Paket med Track & Trace | €6,95 | €2,00 |
| Paket med Track & Trace, endast angiven adress | €7,50 | €2,55 |
| Paket med Track & Trace, endast angiven adress + signatur | €7,74 | €2,80 |
| Leverans till en PostNL-paketpunkt | €6,95 | €2,00 |
Store Pickup in Alphen aan den Rijn (NL)
| Frakt metod | |
| Store Pickup in Alphen aan den Rijn | Inga leveranskostnder! |
Relaterade produkter
Endast online, så mycket konkurrenskraftiga priser
Copyright © 2024 Parts United Marine & Offshore - Alla rättigheter reserverade.