Dansk
Deutsch
English
Nederlands
Svenska
Elring DIRKO HT. (315 C) liquid gasket kit, red, silicone compound, 310 ml Cartridge
Beskrivelse
Dirko™ HT red (acetic curing) is a high-quality, high
temperature resistant single component silicone-based
sealing compound that exhibits permanently resilient
properties. It provides excellent adhesion on all standard metals, cast iron, plastics (except for PE, PP and
PTFE) and glass. Due to a reaction with humidity in the
air Dirko™ HT red cures to form silicone. The product
can be used for a very wide range of applications
Resistant to:
Mineral oils (including additives), synthetic oils,
Lubricating grease, Coolants, UV radiation , cold
and hot water, salt water , cleaning agents, weak
acids and alkalis
Possible applications:
valve cover, oil pan , water pump , oil pump , diff,
rential housing , gearbox, gear oil sump , thermostat housing , control housing , axle cover, lange
connection , headlights, rear light , battery compartment
In 310 ml Cartridge .
temperature resistant single component silicone-based
sealing compound that exhibits permanently resilient
properties. It provides excellent adhesion on all standard metals, cast iron, plastics (except for PE, PP and
PTFE) and glass. Due to a reaction with humidity in the
air Dirko™ HT red cures to form silicone. The product
can be used for a very wide range of applications
Resistant to:
Mineral oils (including additives), synthetic oils,
Lubricating grease, Coolants, UV radiation , cold
and hot water, salt water , cleaning agents, weak
acids and alkalis
Possible applications:
valve cover, oil pan , water pump , oil pump , diff,
rential housing , gearbox, gear oil sump , thermostat housing , control housing , axle cover, lange
connection , headlights, rear light , battery compartment
In 310 ml Cartridge .
Specifikationer
| Colour | Red |
| Oil resistant | Yes |
| Max temp (°C) | +315 °C (24u) |
| Max temp (°C) cont. | -60 tot +300 |
| Chemical basis | Acetoxy silicone |
| Components | Single component |
| Max sealing gap | 2,0 mm |
| Hardness | 30 ± 5 |
| Density (g/ml) | 1,1 ± 0,2 |
| volume | 310 ml |
| Curing | Room temperature vulcanised (RTV) |
| Consistency | Pasty, stable, permanently resilient when cured |
| pH value | Neutral |
| Electrical conductivity | Insulating |
| Elastic modulus 100\% | 0,6 ± 0,2 N/mm² |
| Tensile strength | 2,9 ± 0,2 N/mm² |
| Elongation at break | 600 ± 100 \% |
Yderligere produktinformation
Vi sender din ordre med PostNL. Følgende gælder: bestilt mandag til fredag inden kl. 17 afsendes samme dag. Vi tilbyder forskellige forsendelsesmuligheder. Du kan vælge en af mulighederne under kassen.
Se forsendelsesomkostningerne for
Forsendelse til Holland (NL)
| Fragtmetode | Ordrebeløb under €75,00 | Ordrebeløb over €75,00 |
| Letterbox-pakke+ med Track & Trace | €4,95 | Ingen forsendelsesomkostninger! |
| Pakke med Track & Trace | €6,95 | €2,00 |
| Pakke med Track & Trace, kun angivet adresse | €7,50 | €2,55 |
| Pakke med Track & Trace, kun angivet adresse + signatur | €7,74 | €2,80 |
| Levering til et PostNL-pakkepunkt | €6,95 | €2,00 |
Store Pickup in Alphen aan den Rijn (NL)
| Fragtmetode | |
| Store Pickup in Alphen aan den Rijn | Ingen forsendelsesomkostninger! |
RELATED PRODUCTS
Kun online, så meget konkurrencedygtige priser
Copyright © 2025 Parts United Marine & Offshore - Alle rettigheder forbeholdes.